全无机卤化铅钙钛矿的结构、热力学稳定性和电子性质

有机-无机杂化卤化铅钙钛矿因具有独特的电子和光学特性,已经成为光电领域最有前途的材料。但是,有机-无机钙钛矿材料及器件稳定性差,限制了其实际应用。与杂化钙钛矿相比,全无机卤化物钙钛矿CsPbX₃(X=Cl,Br,I)显示出更强的热稳定性。全无机卤化物钙钛矿CsPbX₃具有多个晶型,在不同的温度下呈不同相结构。目前,关于CsPbX₃的结构和物理性质仍存在争议。本文我们针对三个晶相α-,β-和γ-CsPbX₃的结构,热力学稳定性和电子性质进行了全面的理论研究。第一性原理计算表明,从高温α相到低温β相,然后再到γ相的相变伴随着PbX₆八面体的畸变。零温形成能计算表明,γ相最稳定,这与实验中γ相为低温稳定相的结论一致。电子性质计算表明,所有CsPbX₃钙钛矿都表现出直接带隙性质,并且带隙值从α相到β相再到γ相逐渐增加。这是由于相变发生时,Pb-X成键强度逐渐减弱,使价带顶能量降低,进而带隙增加。在所有相中,α相结构中较强的Pb-X相互作用,导致了较强的带边色散,使其具有较小的载流子有效质量。     

Preparation of modified multi‐walled carbon nanotubes as a reinforcement for epoxy shape‐memory polymer composites

Effectively improving the mechanical properties and thermal resistance of epoxy shape‐memory polymers (ESMPs) without affecting their shape‐memory performance is necessary to expand these polymers in practical applications. In this article, modified multi‐walled carbon nanotubes (MWCNTs) were prepared and used as efficient reinforcement for enhancing the comprehensive properties of ESMPs. Increases of nearly 289% to 444% for impact strength and 112% to 184% for tensile force were obtained by adding only 0.1 to 1 wt% epoxy‐modified MWCNTs. The addition of unmodified and carboxyl‐modified MWCNTs was also investigated but showed less impact on the mechanical properties of the ESMPs than epoxy‐modified MWCNTs. Thermogravimetry analysis (TGA) and dynamic mechanical analyses (DMA) showed that less than 1 wt% modified MWCNTs can enhance the heat resistance of ESMPs greatly. Although the shape recovery time for composite materials increased upon adding the MWCNTs, the entire recovery time was still less than 1 minute, and the shape recovery rate was relatively high, nearly 100%.     

碳酸酯类电解液中Mg(NO3)2添加剂抑制锂枝晶生长的研究

在锂-硫化聚丙烯腈电池体系中,负极锂枝晶的形成和生长严重恶化了电池充放电性能,并给电池带来了安全隐患。而在更有利于稳定正极硫化聚丙烯腈材料的碳酸酯类电解液中,锂枝晶生长尤为严重。本文通过将硝酸镁添加到碳酸酯类电解液中,研究硝酸根和镁离子对锂金属表面改性的共同作用。实验数据发现,在硝酸根和镁离子共同作用下,锂枝晶生长被有效抑制。当硝酸镁浓度为100 mmol·L^-1时,锂铜半电池的库仑效率明显提高,并显著改善了锂-硫化聚丙烯腈电池的循环性能。300次循环后容量保持率为71%,远高于硝酸锂的61%和无添加剂的50%。     

Electrospun Nanofibrous Adsorption Membranes for Wastewater Treatment: Mechanical Strength Enhancement

Functional nanofibrous membranes fabricated by electrospinning technology have attracted much attention in the removal of heavy metal ions from contaminated wastewater. The high specific surface area, high porosity and ease of functionality create an enhanced throughput and high adsorption capacity of the nanofibrous membrane. However, the relatively poor mechanical properties of the membrane with a non-woven nanofibrous structure are one of the major concerns, which can limit the applications in wastewater treatment. Different strategies and methodologies were explored to address the problems and were reviewed in this work, highlighting the possibilities of overcoming the poor mechanical properties of the nanofibrous membrane and to ensure the recyclability and reusability of the membrane during the adsorption process.     

Reactive Dyeing of Electrospun Cellulose Nanofibers by Pad-steam Method

Based on the functional properties of electrospun cellulose nanofibers(CNF), scientists are showing substantial interest to enhance the aesthetic properties. However, the lower color yield has remained a big challenge due to the higher surface area of nanofibers. In this study, we attempted to improve the color yield properties of CNF by the pad-steam dyeing method. Neat CNF was obtained by deacetylation of electrospun cellulose acetate(CA) nanofibers. Three different kinds of reactive dyes were used and pad-steam dyeing parameters were optimized. SEM images revealed smooth morphology with an increase in the average diameter of nanofibers. FTIR results showed no change in the chemical structure after dyeing of CNF. Color fastness results demonstrated excellent ratings for reactive dyes, which indicate good dye fixation properties and no color loss during the washing process. The results confirm that the pad-steam dyeing method can be potentially considered to improve the aesthetic properties of CNF, which can be utilized for functional garments, such as breathable raincoats and disposable face masks.     

Microwave-assisted Catalyzed Synthesis and In vitro Bioactivity Evaluation of Benzimidazoles Bearing Phenolic Hydroxyl

An efficient and facile method was introduced for the synthesis of benzimidazoles in this paper. The optimum reaction conditions were determined. A series of benzimidazoles bearing phenolic hydroxyl(2a-2t) were synthesized in moderate to excellent yields starting from differently substituted hydroxyl benzaldehyde and 4-position substituted o-phenylenediamine via nucleophilic addition in the presence of catalyst Na₂S₂O₅ under microwave irradiation condition. Herein, effects of the catalyst, molar ratio of reactants, reaction temperature and solvent were investigated. The optimal reaction condition was determined. The effect of DMF and EtOH solvent on the reaction was compared. The synthesized compounds were characterized by FTIR, HRMS, ¹H NMR and ¹³C NMR spectroscopy. Further, the bacteriostatic activities of the synthesized compounds were evaluated with ciprofloxacin and itraconazole as a positive control, respectively. Compounds 2b, 2n, 2q and 2r exhi-bited some antibacterial activity. The lowest MIC of antibacterial activity of compound 2b was 32 μg/mL. Meanwhile, the luminescence property of compound 2b was studied. The antibacterial activity of compound 2b, along with their good fluorescence performance highlighted the potential of these compounds as lead structures and owned fluorescence trace for further study towards the development of novel drugs and functional mechanisms in living organisms.     

过渡元素掺杂Fe_3O_4(001)表面磁电性能的理论研究

采用基于密度泛函理论的第一性原理方法,计算Fe_3O_4,Fe_3O_4(001)表面以及过渡元素掺杂表面的电子结构和磁性。结果表明Fe_3O_4的半金属性主要来源于B位Fe离子,并且Fe的3d轨道发生强烈自旋极化;比较(001)表面不同终端A和B终端的表面能和电子结构,得出两种终端稳定性存在差异且A终端较稳定同时表现半金属性;由过渡元素V、Cr、Mn、Co、Cu和Zn取代Fe_3O_4(001)表面A终端A位Fe进行掺杂,形成的6种新表面结构都保持了半金属性。对比它们的表面能和磁矩,Mn掺杂的表面结构最稳定并且磁矩明显增大。     

三个单核钌配合物的合成、表征及抗肿瘤活性

对3种单核钌配合物[Ru（bpy）₂（paH）]PF₆（1）, [Ru（dmb）₂（paH）]PF₆（2）, [Ru（phen）₂（paH）]PF₆（3） （bpy=2,2''-联吡啶, dmb=4,4''-二甲基-2,2''-联吡啶, phen=菲咯啉, paH=2-吡啶甲酸）进行合成,并通过元素分析、红外、核磁和电喷雾质谱对其进行表征。此外,对配合物进行了光谱学和电化学测试,电化学实验表明1~3在0.7~1.0 V范围内均有1个氧化还原峰,说明钌中心发生了氧化还原反应。最后通过MTT法（MTT为3-（4, 5-二甲基噻唑-2）-2,5-二苯基四氮唑溴盐）对配合物进行了体外细胞毒性实验,结果表明：1~3对人乳腺癌细胞、胃癌细胞和肺癌细胞都表现出浓度依赖性,即随着配合物浓度的逐渐增大,细胞的存活率逐渐降低。值得注意的是2对乳腺癌细胞表现出非常明显的抑制作用（IC₅₀=2.85 μmol·L^-1）。     

一个富路易斯碱位配合物的合成、结构及对痕量Ag+的荧光检测

通过溶剂热方法合成了一个由氢键拓展的携带路易斯碱位的三维超分子配位聚合物：{[Cd（HTZ-IP）（HPYTZ）（H₂O）₂]·5H₂O}_n（HTZ-H₂IP=5-（5-四氮唑基）间苯二甲酸;HPYTZ=3,5-（4-吡啶基）-1,2,4-三唑]。X射线单晶衍射结果表明,中心镉离子由含氮杂环羧酸配体和富氮辅助配体连接成"有悬挂手臂"的一维链,而链间则凭借配位水和2个配体的氢键作用拓展成三维超分子化合物。有趣的是配合物存在大量裸露的未配位的N原子,此N原子具有路易斯碱性质,能与路易斯酸性质的Ag⁺有效结合,从而引起配合物的荧光猝灭。该性质能在无色溶液中有效检测10^-4~10^-6 mol·L^-1范围内的痕量Ag⁺离子。     

金属氯化物-苯并噻唑有机-无机杂化化合物的合成、表征及荧光性质

金属卤化物MCl₂（M=Pb²⁺,Cd²⁺,Co²⁺）分别与苯并噻唑（btz）在浓盐酸中、80 ℃下反应,合成了3种有机-无机杂化化合物：（btzH）[（PbCl₃）] （1）,（btzH）₂[CdCl₄]·2H₂O （2）和（btzH）₂[CoCl₄]·2H₂O （3）,其中化合物2和3结构相似。对化合物1~3进行了粉末衍射、红外和紫外光谱、元素分析、热重分析以及X射线单晶衍射表征。荧光测试发现：化合物1~3在393 nm处有发射峰,该荧光来源于苯并噻唑环中电子的π…π跃迁。